Custom Glitter Jordan 5 Tutorial

Screenshot from MVI_8451.MOV.png

I was having a hard time expressing my idea to my client, so I did a quick sketch of the shoe and decided on the colors. That wasn't enough, I tried to explain it in words but could not, so I made it so they could see the work before the work I did any work to the shoe.

_MG_8181.JPG

Closer Look

_MG_8182.JPG

After adding the red, black and the gold glitter to the sketch, my thoughts are now coming to life, you can see where I'm headed with the shoe and make changes until you are happy with what I present to you.

_MG_8456.JPG

Let's Get Started

After the shoes are clean and completely dry, we have to prep the shoes to accept the paint. We will be using * Angelus Leather Preparer & Deglazer and Cotton Rounds that you can get from the Dollar Store, Cotton Balls will also work and I recommend Q-Tips for tight places.*

_MG_8191.JPG

_MG_8192.JPG

Gently rub the shoe to remove the factory finishing coat. I go over the entire shoe 2-3 times before applying the paint to be sure that I removed the finisher and my paint will adhere to the shoe .

_MG_8195.JPG

I applied 2 coats of *Yellow Paint and allowed the first coat 1 hour to fully dry and the second coat about 45 minutes.

_MG_8198.JPG

After 2 coats not too bad, kind of a Pittsburgh Pirates Color way going on.

_MG_8202.JPG
I applied 2 coats of Gold in the case of glitter being chipped from playing sports or whatever reason, the gold color will blend in with the gold glitter and not be as noticeable.
_MG_8204.JPG

Results After 2 Coats of Gold paint

Screenshot from MVI_8408.MOV.png

Apply a third coat of gold and while still wet sprinkle the glitter. Do not worry about covering every part of the shoe on the first coat of glitter. It usually takes 2 coats of glitter to complete a shoe, not counting touch up and detail work.

Screenshot from MVI_8408.MOV - 2.png

Screenshot from MVI_8424.MOV.png

After the first coat of glitter, allow shoes to dry 2-3 hours before applying second coat of glitter.

Screenshot from MVI_8427.MOV.png

Apply second coat of sealer and glitter

Screenshot from MVI_8442.MOV.png

Screenshot from MVI_8442.MOV - 1.png
Apply final coat of finisher and allow shoes 24 hours to dry before wearing them.

_MG_8457.JPG

As always, I'm @jafiresneakers and thanks for stopping by.

  • I will receive a small percentage of the sale of any items purchased when using this link, at no extra charge to you.

H2
H3
H4
3 columns
2 columns
1 column
Join the conversation now
Logo
Center